The Camco Sidewinder RV Sewer Hose Support System # CAM43031 referenced in your question will work with any sewer hose that is up to 3 inches in diameter. As long as your hose falls under this dimension, this system will work great.
This is a really nice product that will cradle your RV's sewer hose up off the ground to prevent damage. The flexible support can be maneuvered around obstacles and the included handle will allow for easy transport. The system can extend to up to 10 feet in... view full answer...
For your RV's sewer hose, I recommend looking at the Camco Sidewinder RV Sewer Hose Support System # CAM43041. This durable all-plastic support system measures 9-3/4 inches tall at the beginning of the system and 6-3/4 inches tall at the end. The width of the cradles is 8-1/2 inches and it has a total length of 15 feet when completely extended.
It features a nice, collapsible design and includes a handle that will fit around the system for easy transport. I have attached a short video... view full answer...
When it comes to a sewer hose for your 2013 KZ Spree Travel Trailer, take a look at the RhinoFLEX RV Sewer Hose with Swivel Fittings, # CAM39761. This kit comes with a 15 ft long hose, 1 bayonet fitting, 2 storage caps, 1 elbow fitting, and a 4-in-1 dump station adapter. Just add the Sidewinder RV Sewer Hose Support, # CAM43031, for the perfect set-up.
I have included a short video for you. view full answer...
The Lippert Flow Down RV Sewer Hose Support System part # LC365053 would contain all of the needed components to make one bend if you were to only use three of the four half-pipe sections. That said, if you want to make one bend and utilize the full length of the system you'd need extra parts which for this system are no longer available separately but you could order two complete systems and use what you need. If not, the Slunky RV Sewer Hose Support System part # 278-S1000 is a great... view full answer...
Yes, if you wanted to use two of the Lippert Flow Down RV Sewer Hose Support Systems # LC365053 on your RV you certainly could. You would have ability to create a 20 foot long run. view full answer...
I recommend using the Viper RV Sewer Hose Kit # D04-0475 to use with the Flush King Reverse Flush Valve # F02-4350. This sewer hose kit come with two 10' hoses so that you can just use one if you are able to get closer to the dump site.
I also recommend using the Sidewinder RV Sewer Hose Support System # CAM43041 from Camco which will hold your hose and has a slight slope to it so that you don't have to constantly be lifting the hose to make sure everything gets to the dump site.
If you... view full answer...
I recommend the Viper RV Sewer Hose Kit # D04-0475. This is our thickest hose at 26mils TPE so it will resist crushing, punctures, and UV damage. It also stays flexible even in cold temperatures. The kit contains two 10' hoses so you can use one if you only need one which is better than having to trying to bunch up a 20' hose. Also included is a 4-1 clear elbow that fits 3" slip, 3", 3-1/2", and 4" threaded sewer points. The clear elbow helps you ensure that the hose and system are clean... view full answer...
You'd need a length of the Lippert Flow Down RV Sewer Hose Support System # LC365053 that you referenced to cover the 20 feet from where the two bathrooms join so that would mean that you need two of the part # LC365053. view full answer...
The best solution for ride quality and stability for your 2017 Winnebago View 24J will be with a SumoSpring # SSA11MTKT installed. This gives better suspension support that translates the best into improved handing, comfort, and support.
Scissor jacks like the part # TJSCHD-24 will do a great job supporting the RV when parked too.
For a sewer hose storage container that will work with the above hose, I recommend the Valterra RV Sewer Hose Carrier part # A04-3460BK which has an inner... view full answer...
Good news! I can help.
The Camco RhinoEXTREME RV sewer hoses # CAM39867 will work great to dispose the waste from your RV to the camp sites main dump station or to a portable waste tank like the Tote-N-Stor # TNS25609. I wouldn't recommend staying connected to the dump or waste tank all the time though, this can cause "the business" to not drain properly because it will never have the right amount of water force to flush the solid contents of the holding tanks and it leaves the opportunity... view full answer...
Your fresh water hose is an easy recommendation, I suggest the Camco RV drinking water hose, 5/8" diameter at 75' Long, # CAM22803. This is a reinforced PVC hose for drinking water made of FDA-approved materials and BPA-free. Because you state that you are new to RV living I will make the suggestion that you also use a water pressure regulator, I suggest the Camco RV Water Pressure Regulator, # CAM40055. Please see the attached video for a visual of product. Because inconsistent water... view full answer...
The majority of sewer hoses won't fit inside a standard 4" RV rear bumper because the molded-on ends which contains the lug and bayonet fittings are too large. However, if you were to go with an option that doesn't have the molded-on ends you could then fit the hose inside the bumper you'd just need to store the fittings and adapters separately. I recommend the EZ Flush RV Sewer Hose part # D04-0054 with the EZ Coupler RV Sewer Fitting Kit part # F02-3303. view full answer...
The RhinoFLEX sewer hose # CAM39761 with 360-degree swivel fittings provides a reliable connection between your RV and sewer inlet. The steel wire reinforced polyolefin tubing helps prevent major damage and ensures it remains extended to your desired length. The length is 15' fully extended and fully retracted: 52-3/4". The tube diameter is 3".
This Valterra RV Sewer Hose Carrier # A04-5094BK will fit the # CAM39761 hose. This hose carrier lets you carry your sewer hose, fishing pole,... view full answer...
We don't sell the 4x4 inch steel bumper, we do however sell the sewer hoses that often can be stored within them like the EZ Coupler RV Sewer Hose Kit w/ Swivel Fittings and 4-in-1 Clear Adapter - (2) 10' Long Hoses # D04-0115. If you don't have a bumper for storage, you may want to consider the Valterra RV Sewer Hose Carrier - Adjustable - 50" to 94" - Black # A04-5094BK. This will allow you to keep your current bumper and still have the function you were seeking and keep your sewer... view full answer...
The Camco RhinoEXTREME RV Sewer Hose # CAM39861 is one of the highest rated waste hoses on the market in terms of durability so it's a bit of shock that yours only lasted a year. The Dominator RV Sewer Hose # D04-0250 and Lippert Waste Master RV Sewer Hose # LC359724 would be the next best options on the market. Of the two options I prefer the Dominator, which has an 23-mil poly material that's durable enough to take some abuse and handle UV rays from the Sun. view full answer...
The best sewer hose system we offer is the Lippert Waste Master RV Sewer Hose part # LC359724. It has a handle for ease of use, leak-proof cam lock fittings for no mess, shut-off levels, clear windows, and much more. The hose is the standard 3" diameter so most pre-built storage compartments can accommodate this but the adapters may need to be stored elsewhere.
I don't have any information on the store compartment of any one particular RV. view full answer...
The setup you have with two waste valves is going to require the tanks to be drained one at a time as they do not make a wye drain hose or wye camlock fitting for the Waste Master RV Sewer Hose part # LC359724. Typically, the point at which the black and grey water tanks merge for draining occurs at the valve with a sewer wye like the Double RV Waste Valve part # T38.
I have attached a list of our sewer wye valves for you if you would like to change your setup so that the black and grey... view full answer...
The Waste Master RV Sewer Hose part # LC360781 is an excellent option to empty the black and grey water tank on a trailer. In regards to storage, most customer store the hose portion in the rear bumper or a storage tube like the Valterra RV Sewer Hose Carrier part # A04-5094BK and the head in one of the many RV storage compartments inside a seal container.
That said, we don't offer any storage systems specifically for this nor does Lippert. view full answer...
For adding bayonet fittings to a sewer hose we have the Camco RV Sewer Hose Adapter part # CAM39543 which comes with the bayonet and the lug side fittings. This is designed to slip into a sewer hose though and we don't have anything that would normally glue over a PVC pipe. view full answer...
The fitting you are looking for is the EZ Coupler 4-in-1 Threaded RV Sewer Adapter with 90-Degree Elbow Fitting - Clear # F02-3112CL. This will allow you to connect your train hose and fits 3" slip and 3", 3-1/2", and 4" threaded sewer inlets at dump station. Internal seal helps prevent leakage and the clear plastic lets you see when the tanks are empty. view full answer...
Go To Results